LSL Tour-Match Thruxton R 16-

Tour Match- Kit

Comfortable and relaxed handlebar position: The task field for the LSL stub handlebar Tour Match. Like no other handlebar, the Tour Match handlebars, which were patented in the early 90'sConstruction of the stub holder, milled from one piece, the steering tube over the triple clamp.
The ideal steering tube angle ensures an optimal wrist position. Thereby it is no longer necessary tothe cranking is adjustable and hand lever positions are possible, which would not be possible with a complex adjustment mechanism.
Thanks to the load-optimized designof the holding clamp a particularly light stub unit was created. The Tour Match combines high bending stiffness with surprisingly low weight '; one half of the stub (46 mm)just 460 g weight on the scale.
The Tour Match is delivered with all mounting parts (mounting parts for the hydraulic fluid reservoirs and additional distances for theThe steering tubes are not pre-drilled according to the model.

The steering tubes are not pre-drilled according to the model.

Scope of delivery:
Tour Match- Kit


Cut the fairing pane:no

Handlebar position compared to the original handlebar:
Higher: 0 mm
Closer to the driver: -25 mm

The following articles fit to thisProduct:
Handlebar weights
grips
brake fluid reservoir
drilling jig
handlebar extension
br/>handlebar extension
br/>care instructions:
- For all handlebars and their surface variants only acid -and lye free cleaner! br/> - Never use in direct sunlight and do not allow the cleaner to dry up! br/> - Contact with brake fluid, brake cleaner, oil, fuel,Do not use polishing pastes with abrasive particles etc., absorb dripping quantities immediately with a soft cloth.
- Before using cleaning agents, check compatibility at aTest inconspicuous area
- No guarantee or warranty if not properly cleaned and cared for.